11.4.2 System test

  1. Go to Configuration SeedEye, Figure 1.

  2. Select Testing of detectors (B) for seed and/or fertlilser.

  3. Press Connection of test detectors for seed and/or fertiliser (B) ON to test communication with the detectors located on the seed hoses and that the detectors are fitted in the correct order.

  4. The LED lights on the detectors will light up blue one after another. When the rotation is completed, all of the LEDs will turn off and the sequence will begin again.

  5. Press Connection of test detector (F)Figure 1 again to conclude the test sequence.