3.7 Pair the iPad with the E-Keeper

In order for an iPad to work with an E-Keeper, they must be paired. If the iPad is used with another E-Keeper or the E-Keeper is replaced, they will need to be re-paired.

Pairing an iPad with an E-Keeper

  1. Power up the E-Keeper.

  2. Ensure that the iPad and E-Keeper are within “Bluetooth” range and launch the E-Control application on the iPad. If “Bluetooth” is not enabled, you will be prompted to enable it on the screen.

  3. Press any button on the E-Keeper. The “Bluetooth” symbol will light up and the E-Keeper will be ready to use.

Note

The iPad must always be unpaired from the E-Keeper before it is paired with a new one.

Unpairing an iPad from an E-Keeper

  1. Start the iPad.

    Figure 1.

  2. Select settings and switch off the Wi-Fi.

  3. Start the E-Control application. A page will be displayed, asking if you want to unpair the iPad from the E-Keeper.

  4. Press the cross, see Figure 1. The “Bluetooth” symbol will go out and it will now be possible to pair the iPad with another E-Keeper.

  5. Select settings and re-start the Wi-Fi.