3.6 Connecting to tractors without ISOBUS connectors

Warning

Connect the red cable to 12 V AFTER connecting the main switch/main relay.

Figure 1.

  1. Tractor battery

  2. Tractor main switch

  3. Power supply to Gateway

  1. Make sure that the main power switch in the tractor is switched off.

  2. Fit the electrical socket in a suitable place with the cable pointing downwards in order to prevent water from getting into the connector. We recommend that the socket be located close to the hydraulic connector at the rear of the tractor.

  3. Route the cable in a suitable way through to the main switch/main relay switch. The cable must be fitted so that it cannot get trapped, work loose or risk coming into contact with hot components on the tractor.

  4. Connect the black cable to minus and the red cable to plus.