3.1 Mounting the holder for the iPad in the tractor

CAUTION

Be sure to check for any concealed wiring prior to any drilling in the tractor cab.

CAUTION

Ensure the connection cable to the machine is not pinched under the rear window of the tractor, as the cable can easily become damaged. Use the designated hatch or access hole. Securely clamp the cable in the tractor cab. This protects the iPad from damage in case the connection cable has inadvertently not been disconnected prior to unhitching the machine.

Important

Ensure that the volume buttons are not pressed in by the edges of holder, when mounting the iPad in the holder.

Figure 1.

  1. iPad

  2. iPad protective case

  3. Holder

  4. USB-C cable

  5. Bracket

  6. Screw/ washer

  7. Bracket

  8. Bracket

  9. Power connector

  10. Bracket (magnetic)

  11. Bracket (magnetic)

  12. Bracket

Figure 2.

  1. Mount the holder securely in the tractor cab. Place the holder well within the field of view when facing the direction of travel. Choose between a regular bracket (G) or a magnetic bracket (J+K). Mount the holder to the bracket as shown in Figure 1.

  2. Connect the USB-C cable (D) to the power connector (I) as shown in Figure 2. Then connect the power connector (I) to the tractor’s 12V socket.