12.4 Registering SeedEye boxes

When SeedEye is to be used for the first time, the boxes must be registered. This is done under Calibration/SeedEye. If two units are installed for seed, there will be two fields for serial number. And one field is used for fertiliser. The serial numbers are selected from the submenus in fields A and B, see Figure 1.

If the Calibration function is activated when driving, a pop-up window will appear with the question of whether calibration is still relevant. This is to ensure that calibration is desired, since the feed output will be turned off if calibration is taking place out on the field.