7.3 Radar

Figure 1.

  1. Shows the total number of radar pulses during calibration.

  2. Shows the calibration result as number of pulses/m.

  3. Field to enter the distance driven when calibrating.

  4. Finishes the calibration sequence.

  5. Resets and starts the measurement.

Calibrate the radar:

  1. Measure an optional distance (at least 100 m).

  2. Press (E) at the starting point to begin measuring.

  3. Press (D) once the measured distance has been covered.

  4. Press the (C) field and enter the distance covered in metres.

  5. The number of pulses per metre of driving distance is calculated and automatically updated in the (B) field.