6.5.2 Creating a custom tramlining program

When you select the “Adapt” tramlining program, it is possible to program the tramlining individually for each bout. Select to lay tramlining tracks in both wheel tracks in the bout, in the left or right wheel track or no tramlining at all. It is possible to program up to 30 cycles.

Figure 1.

  1. Select the number of cycles (bouts) to be included in the tramlining program. If all rows cannot be displayed on the screen, you can scroll through the list by moving your finger up or down on the touch screen. For machines without CANBus Flexhead, see 1 and if CANBus Flexhead is installed, see 1.

Figure 2.

  1. Select the tramlining setting for each bout included in the tramlining program. Press the field for the bout that is to be changed and select a tramlining option.

Figure 3. CANBus Flexhead

  1. Select the tramlining setting for each bout included in the tramlining program. Press the field for the bout that is to be changed and select a tramlining option.

Table 1.

Both

Left/Group 1

Right/Group 2

Off