6.5.2 Alarms menu

Note

If you press the “OK” button, the popup window will close; the alarm and the reason for the alarm will remain active. Press the log to re-enter the alarms menu.

Enter the alarms menu by pressing the log. See (A) in Figure 1.

The alarms menu shows a list of all alarms that have not been acknowledged. Select an alarm by using the UP/DOWN arrows on the VT or press an alarm field on the iPad. Information on the alarm is shown in the new window and the alarm can be acknowledged.

If an alarm concerns different sections, e.g. right or left seed meter, this is specified with RIGHT/LEFT or BOTH in the alarm text.

Figure 1. The alarms menu for alarm messages

Remedy the fault(s) that caused the alarm(s) and acknowledge one alarm at a time or all the alarms at once.

  1. Log

  2. Move UP the list of alarms.

  3. Acknowledge individual alarms.

  4. Move DOWN the list of alarms.

  5. Acknowledge all alarms.

  6. Go to previous view

Important

If there are critical alarms, they must all be acknowledged before work can continue. If there is a critical alarm, the feed is shut off!

Note

In section 12 Alarm list all alarms are described with the suggested action required.