7.2.4 SeedEye Configuration

Figure 1.

  1. Blockage sensitivity for fertilizer — SeedEye sensor sensitivity for blockage (fertilizer coulter).

  2. Flow Monitor ON/OFF — Turn on/off row flow (each row is compared to the average flow across the boom) and section flow monitoring (monitors sudden section-wide drops in flow).

  3. Low Flow Sensitivity — Sensitivity for row flow monitoring.

  4. Section Flow Sensitivity—Senisitivty for a drop in the fertilizer flow on a section. If the flow falls below the required level the system will alarm on an entire section.

  5. Fertilizer Sensors connection Test—Tests the connection of the sensors on the fertilizer coulter (Blue sensor LED used)

  6. Readdress fertilizer sensors—Fertilizer sensors are re-registered with the SeedEye box, e.g. due to changed sensor.

  7. SeedEye sensor Status—View the current sensor status and select if some should be ignored.

Figure 2.

The actual row is shown where # is displayed.