3.1 Mounting the holder for the iPad in the tractor

CAUTION

Be sure to check for any concealed wiring prior to any drilling in the tractor cab.

CAUTION

Ensure the connection cable to the machine is not pinched under the rear window of the tractor, as the cable can easily become damaged. Use the designated hatch or access hole. Securely clamp the cable in the tractor cab. This protects the iPad from damage in case the connection cable has inadvertently not been disconnected prior to unhitching the machine.

Important

Ensure that the volume buttons are not pressed in by the edges of holder, when mounted the iPad in the holder.

Figure 1.

  1. iPad

  2. Guard

  3. Holder

  4. Cable

  5. Bracket (regular)

  6. Bracket

  7. Electronics

  8. Bracket (magnetic)

  9. Bracket

  1. Securely mount the holder in the tractor cab. The holder should be located within the field of vision when driving forwards. Choose between a regular bracket (E) or a magnetic bracket (H+I). Mount the holder to the bracket as shown in Figure 1.

  2. Connect the holder’s power/charge cable (D) to the tractor’s 12V socket.