7.3 Calibration of liquid fertiliser

Figure 1. Calibration menu liquid fertiliser

  1. Enter the desired application rate.

  2. Adjusts the rate to correct for measurement errors.

    Note

    Measure the outputted volume at the wanted work point and if the amount is less than expected, increase the rate factor, or vice versa.

  3. Select the nozzle size for the mounted valve A/B.

  4. If the liquid fertiliser is to be circulated back to the tank, select YES. If the liquid is only to be circulated back to the pump, select NO.

  5. Output to fill and pressurise the output system in working mode

  6. Resetting the pressure control valve in working mode.