7.4.1 Calibration menu

Figure 1.

Display

  1. Calculates the number of pulses.

Calibration menu settings (Values are displayed either in metric or imperial units, depending on which one has been selected in the general settings menu).

  1. Enter the required micro-granulate application rate.

  2. Select which of the feed units is to be calibrated (i.e. a row with a calibration bag).

    The position of the feed units is the same as that of the row unit.

    If the calibration is to cover all feed units, select ON (default setting). If calibration is to be carried out individually for only one row unit, select OFF.

  3. Enter the weight of the calibration bag contents. Note that the weight can only be indicated when the reported number of pulses is greater than zero.

  4. Feed for filling the feed system.

  5. Calculates pulses/kg. (You can also enter pulses/kg manually by pressing the row and entering the value in the pop-up window.)

  6. Calibrate