4.1 Connecting with E-Control

  1. Figure 1.

Note

iOS 10.2 or a newer version is required in order to use E-Control.

Note

If it has not been installed already, the E-Control app must be downloaded as per 4.2 Download the E-Control application, ISOBUS/E-Control.

  1. Connect Gateway to the ISOBUS connector or other power supply on the tractor.

    CAUTION

    Gateway must ALWAYS be supplied with power when the machine is in operation.

  2. Start the iPad in the tractor cab or close to Gateway. Connection to the Gateway network takes place automatically.

  3. Open the E-Control application by pressing the symbol.

    • It can take up to two minutes for the application to open.

  4. The machine’s home screen is displayed when the download is complete.

CAUTION

Always check before starting work that the iPad is connected to the correct network. Once the local network from Gateway is enabled for the first time, the iPad will automatically find the network the next time you are within range. However, if you have already connected to another network, the network must be selected manually.