4.1.1 If the network is not found automatically
If connection to the network does not take place automatically, the network connection must be enabled. This might happen if, for example, you have already connected to another network or you are using an iPad that has not been connected to the network from Gateway before (network unknown).
Start the iPad in the tractor cab or close to Gateway.
Select network settings and enable Wi-Fi. (Please read the user manual for the iPad or contact Apple support for instructions about how to select the network and enable Wi-Fi.)
The local network from Gateway will be shown under network selection. The network name is “machine type”-[Gateway serial number], e.g. TP-VAD-000125.
If the network is not shown immediately, wait for a minute or so while the iPad searches for networks. If the network cannot be found after several minutes, despite correct power supply, contact a service technician.
Press the network name and enter the password for the network. The password is 12345678.
The network name is shown in the Wi-Fi field and a checkmark icon shows that the connection is enabled.
Exit network settings by pressing the iPad home button.
Open E-Control using the icon.