16.2.1 Switching between transport and work position

CAUTION

Switching between transport position and working position must take place on level ground with an even surface.

Note

To unfold the wings, the iPad must be plugged in to a power cable1

The basic model of the machine is adjusted manually. It can be adjusted hydraulically using optional equipment.

If the machine is in working position when the terminal is started, press to display the home screen.

Figure 1.

If the machine is in the transport position when the terminal is started, the position for wing folding is displayed; see the figure above. Fold out the wings as follows

  1. Press the wing folding button for three seconds. The transportation mode button is displayed.

  2. Fold out the wing sections manually or with the hydraulic lever for wing folding. The home screen button is displayed.

  3. Press the home screen button.

1 Applies to PCV and TPF.