16.3.1 Unfolding
Release the brakes before lowering the machine. Risk of damage to the linear sensor.
Press and hold the wing folding button until the folding menu opens, which guides through the process.
Which hydraulic circuits to activate are displayed on each step in the folding menu.
Figure 1.
Raise the machine to maximum height. The current and target heights are displayed on the folding menu.
When current height reaches the target height, the folding menu automatically continues to the next step.
Figure 2.
Raise the tractor 3-point linkage to the highest position. Confirm by clicking OK when 3-point linkage cannot be lifted higher.
Figure 3.
Activating the hydraulic circuits will disengage the wing lock and the wings will unfold. In case no movement is detected, the prompt to make sure that the wing locks are disengaged will be shown.
When the wings are fully unfolded, the folding menu automatically continues to the next step.
Figure 4.
Wait for the accumulator to charge. The current and target pressure are displayed on the folding menu.
When pressure is reached, the folding menu automatically continues to the next step.
Figure 5.
Transverse the rear rank to seeding position.
Figure 6.
Make sure that the rear rank has reached seeding position and confirm by clicking OK.
The folding guide will close as the machine has now been unfolded.