11.7 Alarms
Figure 1. Example of alarm, rotation sensor
When an alarm is triggered, an audible signal will be emitted and the alarm will be displayed visually on the home screen.
Enter the alarms menu by pressing the alarm symbol. The nature of the alarm is described directly on the screen.
If an alarm relates to one or more specific row units, all the row units are displayed as a line of numbered blocks where the row unit(s) indicating alarms are shown in a different colour.
Remedy the fault(s) that caused the alarm(s) and acknowledge one alarm at a time or all the alarms at once.
If there are critical alarms, they must all be acknowledged before restarting WS9.
Go to the home screen.
Move UP the list of alarms.
Move DOWN the list of alarms.
Acknowledge individual alarms.
Acknowledge all alarms.
In section 19 Alarm list, ISOBUS/E-Control all alarms are described with the suggested action required.
Alarm levels
If a critical alarm is triggered, the feed on all units stops. The error condition must be dealt with and the alarm acknowledged before the feed is restarted.