11.2.4.1 Main menu

Figure 1.

This is where information is entered regarding the geometric location of the drill in relation to the tractor.

  1. Offset X = Distance between the hitching point and the ground contact point, e.g. gauge wheels and hitching point. Expressed in mm.

  2. Offset Y = Compensation for any canting. If the machine is pulling in one direction or if it is offset to one side. Expressed in mm.

  3. Connector = Type of coupling device. Three point linkage or hitch.

  4. ISOBUS tramlining

  5. Liquid fertiliser

  6. Seed

  7. Fertiliser

  8. Micro-granulate

  9. BioDrill