9.1 Coulter Pressure

CAUTION

In order to avoid hot run in the hydraulic system adjustment should be as small as possible, but the pressure should be above 140 bar.

CAUTION

Increased percentage value leads to increased voltage to the valve which results in increased system pressure.

Figure 1.

For full functionality, the fan should be running.

  1. Target

  2. Actual

  3. Pressure adjustment button –

  4. Pressure adjustment button +

The display shows the value (A) of the current pressure in the system. The system pressure can be adjusted with the +/- buttons (C). The amount of adjustment is shown by the actual value (B). The value should only be adjusted if the pressure is not high enough after setting the correct speed of the fan.