7.4.4 Settings for custom mode
It is very important to have the correct setting for the machine on this side. If you find that the recommended rotor or gear is not performing as expected, it may be due, for example, to lower/higher speed. It is then possible to change which rotor/gear to use. Any modifications such as not using the suggested rotor or gear must be specified in the adapted settings. This is done by enabling adapted settings with the "Adapt" button and then specifying the installed rotor or gear on the machine by selecting them from the list.
Activate custom mode (G) by selecting ON.
Figure 1.
Select gear. The green line below the image is the recommended gear.
Low gear appears as a turtle and high gear as a hare.
Figure 2.
Select rotor. The green line below the image is the recommended rotor.
Figure 3.
The machine is now configured to be used with the selected rotor and gear.